SCOSCHE NN03B Nissan Color Coded Wire Harness Compatible with SELECT 1995 to 2013 Vehicles

10 reviews for SCOSCHE NN03B Nissan Color Coded Wire Harness Compatible with SELECT 1995 to 2013 Vehicles

1. 

   5 out of 5

   RGB – January 23, 2020

   They worked great on my 99 Nissan maxima. Easy plug and play.

2. 

   5 out of 5

   Daniel – May 22, 2020

   This was a perfect fit on my 2000 Nissan Maxima. No cutting involved. The wires were pre cut and came labeled to make installation easy. Just connected the wired to my new deck and plugged them into my old wire harness and, tada! It works.

3. 

   5 out of 5

   Austin James Austin James – July 2, 2020

   This fit my 2003 nissan frontier. The ground wire wasn’t in the right spot, but I made it work still a helpful connector

4. 

   5 out of 5

   Keystone Motorsports – August 6, 2020

   Perfect wiring fitment. Installed a Dual marine radio and everything matched up smoothly. Turned on the radio and the BOSE amp turned right on. Excellent.

5. 

   5 out of 5

   DAdams – August 24, 2020

   Finished installing my Alpine stereo mated to a set of Rockford Fosgate 6.5 inch speakers and these harnesses made the job so easy. After removing the factory Nissan stereo I was able to wire up my Alpine with the matching color coded wires and then plug the harness directly into the factory connectors. The only thing I had to different from the factory connector was to be sure to drill a hole in the metal bracket in the dash and mount the black ground wire. Every other color matched up perfectly. Just be sure to use your owner’s manual from your aftermarket stereo to get the correct sequence on your wiring. I highly recommend these harnesses for the easy of installation, price, and the quality.

6. 

   5 out of 5

   Christopher armstead – August 24, 2020

   Was looking for a harness for a aftermarker radio this will only work for those nissan that do not have factory amp it will only work if you know how to buy pass witch i had to do so to keep my bose speakers and factory amp once again u will need a difrent plug hardness if u want keep factory amp speakers u will have to buypass this one look up on youtube to find vids on bypass factory amps easy did it my self

7. 

   5 out of 5

   Marleesa Tennis – September 5, 2020

   I got it because my stock stereo went out in my 2002 Infiniti I35 and they are very expensive to replace.. So I got this to connect a after market stereo because you dont want to remove stock stereos in newer cars because it will mess your car up

8. 

   5 out of 5

   RP – January 11, 2021

   Initially thought this wouldn’t work on my 05 maxima. I’m apparently dumb fuzz led by all the connectors…this worked just fine. Had to buy a separate steering wheel module for those controls to work.

9. 

   5 out of 5

   Taylor Made – January 18, 2021

   I installed this harness on a 2000 Nissan Sentra with an alpine cde sxm145bt radio. I am not for sure but I had 2 wires left that I did not connect. But the radio works with no issues.

10. 

    5 out of 5

    Wayne Fry – February 18, 2021

    Fyi, some places will try to tell you that you MUST use something like the oea4 to hook this harness to your Bose factory system.. I recommend trying it with just the harness… Mine worked fine, no additional stuff. 2006 Infinity g35 w Bose 6 disc changer, replaced with pioneer avh-3800bhs