Scosche GM02B Compatible with Select 1986-05 GM Mini Power/Speaker Connector / Wire Harness for Aftermarket Stereo Installation with Color Coded Wires

10 reviews for Scosche GM02B Compatible with Select 1986-05 GM Mini Power/Speaker Connector / Wire Harness for Aftermarket Stereo Installation with Color Coded Wires

1. 

   5 out of 5

   Kenneth Hoagland – February 22, 2020

   This Harness worked great for my 2002 Chevy Tahoe. The only problem that I had ( WHICH WAS NOT THE FAULT OF THIS WIRING HARNESS) was that I have the separate cd changer and powered sub-woofer. So when I connected everything together I had no sound. The stereo had two connectors on the back. This connector only fits the one. I couldn’t find anything for the second connector which goes to the cd changer and was told I didn’t need it. I find out from a person on you tube that the pink wire on the second connector has to connect to the power amp lead as well. Once I connected the jumper wire to the amp lead Ihad sound.This harness did exactly what I needed it to do and I didn’t have any issues with it.

2. 

   5 out of 5

   Brad Bishop – May 15, 2020

   I put this into my 2000 Silverado and it works great. Most stereos require an auxiliary constant 12v to be ran from the battery or fusebox and this is no exception. This was perfect if you know what you are doing.

3. 

   5 out of 5

   The Astute Nomad – June 27, 2020

   Some Chevrolets come with amplifiers from the factory for the radio. This won’t work for that. I tried. I don’t want to bypass my factory amplifier, but instead use it since it is already connected to all my door speakers.What you will NEED is a an interface that basically connects an aftermarket radio to the FACTORY amplifiers. This is the part number for the PAC Interface which connects any aftermarket radio to BOSE or other FACTORY amplifiers: PAC ROEM-GM21ANotice: there are part numbers on Amazon with almost the same part number but instead it isPAC: AOEM-GM21A. This one is incorrect. This is an amplifier add on kit for a factory radio.

4. 

   5 out of 5

   speedracer138 – July 2, 2020

   Easy to read & follow color coded wires. Easy installation with Butt Splices. Fits OEM Plug and works great.

5. 

   5 out of 5

   Arturo Pacheco – July 16, 2020

   Works. The PO ripped out the harness out of my 85 Trans Am so I went to the junkyard and took the harness out of a 4th gen. Then I just spliced it in.

6. 

   5 out of 5

   CaseyCasey – August 22, 2020

   This was installed in a 2002 GMC Yukon XL to replace the old OEM 2 din stereo with a new single din Bluetooth Car Stereo, this connector/harness is a perfect match for the above vehicle OEM harness without factory amplified systems, fits great, easy to install

7. 

   5 out of 5

   Karel 82 – September 5, 2020

   Yesss

8. 

   5 out of 5

   Kasey – September 5, 2020

   Worked great for my 95 Chevy. It shows what wires are for what on the package.

9. 

   5 out of 5

   Marion PattersonMarion Patterson – September 18, 2020

   I have a 2002 Chevy Avalanche I was upgrading to a after market touchscreen radio i hooked every wire as it should but had no sound did not know that the truck have a factory amp If you have this problem hook the blue remote wire coming from the wire harness to your 12 volt red wire I hope this save you time and more money

10. 

    5 out of 5

    dan rossi – February 10, 2021

    I use this company for all my car audio harness and installation needs. All wires are labeled and i never have a issue with pluging to the factory side.